Toll Free: (800) 337-9826
Due to unprecedented demand for our products, certain products are not shipping as quickly as expected. We will notify you if there is a delay with your order. If you would like to get an estimated shipping date for a specific product, please feel free to contact us.
30' Cut | LH/RH Side Draper Belt | Single Side V-Guide | Double Delivery | 41.6" x 297.8" | Replaces MFG 49518, 100265 | Fits MACDON 960 Harvest Header (1995-2000)
30' Cut | LH/RH Side Draper Belt | Single Side V-Guide | Double Delivery | 41.6" x 297.8" | Replaces MFG 49518, 100265 | Fits MACDON 960 Harvest Header (1995-2000)

30' Cut | LH/RH Side Draper Belt | Single Side V-Guide | Double Delivery | 41.6" x 297.8" | Replaces MFG 49518, 100265 | Fits MACDON 960 Harvest Header (1995-2000)

Your Price: $585.00
Part Number:HH-1009277-3
  • Category:Draper Belts

NOTE: MacDon has patents on the double side seal and double V-Guide for their OEM belts and must be purchased from an Official Authorized MacDon Dealer. This aftermarket draper belt does not have the double side seal and has a single V-Guide but utilize the same patented WCCO RAPTOR® material as the OEM belting with a new edge feature at a much lower cost.

RAPTOR™ IS ON ‘THE CUTTING EDGE’
The 41.6" aftermarket drapers now come with WCCO's new edge feature!
  • Extra rubber on the belt hems to increase the edge stiffness
  • Keeps draper belt edge tighter to the underside of the cutter bar
  • Reduces material build-up underneath during harvesting operation

WCCO Belting, Inc. is the largest supplier of OEM harvest header drapers in the world. Since the harvest header market has been transitioning from traditional auger headers to more modern belted headers, it is estimated that two out of three new headers now contain draper belting. Belted headers will increase your capacity and decrease product loss, operate with an even feed, work with flex designs, and are less in weight compared to traditional augers.

WCCO’s patented RAPTOR™ Belting uses 100% polyester filament fabric with a friction coating capability. Filament will always outperform a similar spun fabric with higher tensile, tear, and puncture resistance; the fabric is also less volatile in pricing and is more readily in supply. Until RAPTOR™ technology, it was nearly impossible to friction coat filament fabric because the surface was too smooth for the rubber to form a strong bond. Our draper features a friction coat on the underside of the belt which reduces weight and drag, and it uses a skim coat on the topside of the belt for optimal protection. RAPTOR™ draper belting has higher strength properties, superior durability, and has more stable market pricing compared to other conventional draper options.

WCCO’s RAPTOR™ draper belting also features an innovative teardrop-shaped fiberglass reinforcement rod inside of the cleat for increased stiffness, making the Raptor significantly stiffer in the cross direction than its competition.


Fits Model: MACDON 960 Harvest Header (1995-2000)

Belt size (Inches): 41.6" Wide x 297.8" Long

Belt Type: LH/RH Side Draper Belt | Single Side V-Guide

Style: Double Delivery

Cut (FT): 30'

Replaces Mfg No: 49518, 100265

Weight per belt: 53 lbs


This belt is pre-cut to length and comes with all appropriate OEM style connection parts (e.g. bars, tubes, pins) needed for installation on your piece of equipment!